1 VC210/VC220/VC230 MOBILE PHONE TESTER (DISCONTINUED) Fri Jul 25, 2014 9:27 am
Admin
Admin
Features
The VC200 is the ideal tool for testing GSM/WCDMA Mobiles during manufacture, maintenance, servicing, troubleshooting and point of sale because of these many features:
[size]
Support GSM & W-CDMA full frequency bands
[/size]
[size]
Signaling Tester Mode
In signaling tester mode, protocol software establishes a connection call with the mobile phone and performs radio characteristics tests (conforming to the 3GPP TC protocol).
[/size]
[size]
Tx/Rx Tester Mode
In Tx/Rx tester mode, each of the following operations is carried out simultaneously without activating the protocol (no signaling): transmission of downlink Layer 1 signals to the mobile phone, reception of uplink signals from the mobile phone, and measurements of the transmitter characteristics of the mobile phone. You can perform a receiver characteristics test (Rx test) and a transmitter characteristics test (Tx test) on the mobile phone without signaling.
Auto Test Mode
In Auto Test Mode, all tests are carried out automatically, requiring only minimal button operation on the mobile phone.
[/size]
]
The VC200 is the ideal tool for testing GSM/WCDMA Mobiles during manufacture, maintenance, servicing, troubleshooting and point of sale because of these many features:
- Low cost GSM/W-CDMA mobile phone tester
- Supports multiple GSM & W-CDMA frequency bands
- Signaling tester mode - Auto test mode/Manual test mode
- Tx/Rx Tester mode
- Suitable for manufacture, maintenance and servicing
- Compact and lightweight
[size]
Support GSM & W-CDMA full frequency bands
[/size]
- W-CDMA(UMTS)
- Band I
- Band II
- Band III
- Band IV
- GSM
- GSM850
- P-GSM
- E-GSM
- R-GMS
- DCS1800
- PCS1900
[size]
Signaling Tester Mode
In signaling tester mode, protocol software establishes a connection call with the mobile phone and performs radio characteristics tests (conforming to the 3GPP TC protocol).
[/size]
Test items
| |
(W-CDMA)
| (GSM)
|
Tx/Rx Tester Mode
In Tx/Rx tester mode, each of the following operations is carried out simultaneously without activating the protocol (no signaling): transmission of downlink Layer 1 signals to the mobile phone, reception of uplink signals from the mobile phone, and measurements of the transmitter characteristics of the mobile phone. You can perform a receiver characteristics test (Rx test) and a transmitter characteristics test (Tx test) on the mobile phone without signaling.
Auto Test Mode
In Auto Test Mode, all tests are carried out automatically, requiring only minimal button operation on the mobile phone.
[/size]
Bulletin 7330-15E | VC200 Series | 1,020 KB | Download |