1 Maya 3D Tutorial Modeling - islands Thu Oct 09, 2014 12:37 am
Admin
Admin
[You must be registered and logged in to see this image.]
Mountains:
1. Draw two curves.
\
2 draw some high and low mountain curves.
\
Select the tool with Birail 3+ clockwise these curves, Enter, and then select one of the two-step drawing curves. Will see the following figure:
\
4. Clear NURBS history
5 draw two curves as shown below:
\
6. Select the upper curve, with Edit Curves> Detach Curve it and mountains separated.
7 Select the bottom of the curve and the curve of the application to be separated Surface> Boundary. Others repeat.
\
8 new layer into the inside of the mountain. Named this layer. Now the mountains well. Save. As shown below:
\
Beach:
1. Select the first bar graph, copy them.
2. To build a layer named "Beach", the copy of the curve into the inside.
3. Build two combined closed curve crossbar curve
\
4. Merge them.
5. Mobile CVs, make sure than the big mountain.
\
6. Delete the curve of history.
7. Create more curves Birail 2 tools.
8. Clear Beach history
9 isolated beaches and other curves.
\
\
Beach House:
1. Draw some circles, there is arranged order.
\
2. Move the circle to make them closer to each other. Figure:
\
3. To do three sets of separation. As shown below:
\
4: Select them and then they attach a surface.
\
5 Select the target circle, they create a kind of external parties. As shown below:
\
Step 6 to select the sample surface on the side, put their curved stick together.
Now we have our own shoots a template. Replicated multiple times to create the floor, walls, ceiling.
\
\
\
\
7. Select all the shoots, grouping them.
8. Create a new layer, named Beach_house. Put this layer inside the house.
\
Tree:
1. Built one named tree, build trunk as shown below:
\
2. Create some curves depicting a group of half leaf shape. Figure below:
\
3. Reverse direction of the curve, the other part is created.
\
4. Clear history of these two curves.
5 Create a sample graph of their party. Insert three isoparm on this leaf
\
Select lofting curve, create a small grid spacing is 5 * 2 * 5
Clear history.
Move to the center of the leaves leaf head.
\
The leaves of one to the top of the tree. Copy it several times, scaling, rotation placed them. Select all the leaves and trees,
Grouping them. Central point on the Tree layer. As shown below:
\
Place them:]
Mountains:
1. Draw two curves.
\
2 draw some high and low mountain curves.
\
Select the tool with Birail 3+ clockwise these curves, Enter, and then select one of the two-step drawing curves. Will see the following figure:
\
4. Clear NURBS history
5 draw two curves as shown below:
\
6. Select the upper curve, with Edit Curves> Detach Curve it and mountains separated.
7 Select the bottom of the curve and the curve of the application to be separated Surface> Boundary. Others repeat.
\
8 new layer into the inside of the mountain. Named this layer. Now the mountains well. Save. As shown below:
\
Beach:
1. Select the first bar graph, copy them.
2. To build a layer named "Beach", the copy of the curve into the inside.
3. Build two combined closed curve crossbar curve
\
4. Merge them.
5. Mobile CVs, make sure than the big mountain.
\
6. Delete the curve of history.
7. Create more curves Birail 2 tools.
8. Clear Beach history
9 isolated beaches and other curves.
\
\
Beach House:
1. Draw some circles, there is arranged order.
\
2. Move the circle to make them closer to each other. Figure:
\
3. To do three sets of separation. As shown below:
\
4: Select them and then they attach a surface.
\
5 Select the target circle, they create a kind of external parties. As shown below:
\
Step 6 to select the sample surface on the side, put their curved stick together.
Now we have our own shoots a template. Replicated multiple times to create the floor, walls, ceiling.
\
\
\
\
7. Select all the shoots, grouping them.
8. Create a new layer, named Beach_house. Put this layer inside the house.
\
Tree:
1. Built one named tree, build trunk as shown below:
\
2. Create some curves depicting a group of half leaf shape. Figure below:
\
3. Reverse direction of the curve, the other part is created.
\
4. Clear history of these two curves.
5 Create a sample graph of their party. Insert three isoparm on this leaf
\
Select lofting curve, create a small grid spacing is 5 * 2 * 5
Clear history.
Move to the center of the leaves leaf head.
\
The leaves of one to the top of the tree. Copy it several times, scaling, rotation placed them. Select all the leaves and trees,
Grouping them. Central point on the Tree layer. As shown below:
\
Place them:]