Link:INB Home|INB English| INB русский язык|INB العربية|INB Türkiye|INB فارسی|INB Español|INB Français|INB Português|INB Deutsch|INB 國語|INB 中文|INB 日本语|INB 한국어|INB ภาษาไทย|INB tiếng Việt||Rhino Tutorial Modeling a trackball mouse in Rhino 5
INB English forum
Welcome to (Industry & Native boffin) The industrial age here is full of fighting spirit, you and I both through this network space with Native biological spirit boffin came to the mad labs. home INBforum.com, come and join us Permanent name: inb-english.forumotion.com
INB English forum

Welcome to (Industry & Native boffin) The industrial age here is full of fighting spirit, you and I both through this network space with Native biological spirit boffin came to the mad labs. home INBforum.com, Permanent name: inb-english.forumotion.com


You are not connected. Please login or register

《《《《《《《上一页INBforum   Go down

上一页INBforum》》》》》》》View previous topic View next topic Go down  Message [Page 1 of 1]

1 Rhino Tutorial Modeling a trackball mouse in Rhino 5 on Sat Sep 25, 2010 9:22 pm

Admin

avatar
Admin
If you discovered this Rhinoceros 3D tutorial page through a direct link or search engine, please note that you're on page 5 of the tutorial! Please complete the previous page first if you haven't done so.
On the other side, split the mouse with the extruded solid. Then split the extruded solid with the small surface that just has been split out.

Delete the top part (yellow in image)
[You must be registered and logged in to see this image.]
Select the small surface (see image on the right) and choose "surface---edit tools---shrink trimmed surface". This will make the lines on the small surface visible again, which makes it easier to work with.[You must be registered and logged in to see this image.]
This is how the shrinked surface looks like:

Join the small surface with the lower part of the extruded part. This shape is our button.
[You must be registered and logged in to see this image.]
Hide this button-shape and use "surface-edit tools-untrim" to untrim the hole in the mouse. This is a command which is very usefull![You must be registered and logged in to see this image.]
Hole is gone:[You must be registered and logged in to see this image.]
Mirror the extruded part again from the other side and now also difference this out of the mouse.[You must be registered and logged in to see this image.]
Fillet these edges:[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
Unhide the button and mirror it[You must be registered and logged in to see this image.]
Also fillet the top edges of the buttons.

I created the buttons in this way, because I wanted their top surface to match up with the mouse shape. That's why I used the mouse shape to create the buttons top surface.
[You must be registered and logged in to see this image.]
Assign colors, materials, place some lights and render.[You must be registered and logged in to see this image.]
Rhino can export its models to almost any other 3D package. This is a render made with 3DStudioMax and the Vray plugin.[You must be registered and logged in to see this image.]
]

View user profile http://eng.inbforum.com

上一页INBforum   Go down

上一页INBforumView previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum

Copyright ©2009-2016 LTD Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

IT:SINGLESERVGoogle谷歌翻译TranslateFORUMSOFTLAYERGoogle谷歌广告联盟AdSenseAsia

 

Forum create on Forumotion | © PunBB | Free forum support | Contact | Report an abuse | Free forum