Home
》》》》》》》1
Arduino Experimental Kit from Frretronics Thu Jul 31, 2014 8:24 am
Admin
Admin
Product Description
Servo motor, lights, buttons, switches, sound, sensors, breadboard, wires and more are included with a Freetronics Eleven Arduino compatible board in this extensive hobby experimenter, inventor and starter kit. Complete with some great instructions and a supporting web page and software examples, this is everything you need to get started for a fun range of electronics and Arduino related projects.
• No soldering required
• Instructions for many educational and fun projects included
• Supplied in a presentation box
• Dimensions: 340(W) x 165(H) x 36(D)mm
Contents:
• 1 x Freetronics “Eleven” Arduino-compatible board with USB cable
• 1 x “SOUND” Piezo & Sound Module
• 1 x “LIGHT” Light Sensor Module
• 1 x micro servo motor
• 1 x Solderless breadboard
• 65 x Solderless breadboard jumper wires
• 10 x red 5mm LEDs
• 10 x green 5mm LEDs
• 1 x RGB 5mm LED
• 4 x Tactile push buttons
• 2 x 2N7000 MOSFET transistors
• 10 x 470 Ohm resistors
• 10 x 1K Ohm resistors
• 10 x 10K Ohm resistors
• 2 x 1N4004 power diodes
• 1 x 74HC595 shift register IC
• 1 x 40-pin header strip
• 1 x 10K Ohm variable resistor
• Printed project guide
Note: The shift register module (on a PCB) pictured is supplied as a DIP format IC (74HC595) for use with the solderless breadboard in the current kit.]
Servo motor, lights, buttons, switches, sound, sensors, breadboard, wires and more are included with a Freetronics Eleven Arduino compatible board in this extensive hobby experimenter, inventor and starter kit. Complete with some great instructions and a supporting web page and software examples, this is everything you need to get started for a fun range of electronics and Arduino related projects.
• No soldering required
• Instructions for many educational and fun projects included
• Supplied in a presentation box
• Dimensions: 340(W) x 165(H) x 36(D)mm
Contents:
• 1 x Freetronics “Eleven” Arduino-compatible board with USB cable
• 1 x “SOUND” Piezo & Sound Module
• 1 x “LIGHT” Light Sensor Module
• 1 x micro servo motor
• 1 x Solderless breadboard
• 65 x Solderless breadboard jumper wires
• 10 x red 5mm LEDs
• 10 x green 5mm LEDs
• 1 x RGB 5mm LED
• 4 x Tactile push buttons
• 2 x 2N7000 MOSFET transistors
• 10 x 470 Ohm resistors
• 10 x 1K Ohm resistors
• 10 x 10K Ohm resistors
• 2 x 1N4004 power diodes
• 1 x 74HC595 shift register IC
• 1 x 40-pin header strip
• 1 x 10K Ohm variable resistor
• Printed project guide
Note: The shift register module (on a PCB) pictured is supplied as a DIP format IC (74HC595) for use with the solderless breadboard in the current kit.]
